Call us
+1 (888) 658-5774
profiPANEL
The design HMI enclosure
Optionally available certification:
(UL approval not valid for panels with basic profile 120)
Up to IP 65
The key product features:
• Enclosure material: Aluminum profiles
• Enclosure surface: anodized silver
• Corner cover: RAL 7035
• Profile enclosure – manufactured to measure in 9 installation depths
• Direct access through doors with locks and hinges (on the longer side as standard)
• Enclosure seal: EPDM
To configure this product, please use our practical profiPANEL configurator
More
Thanks to the option of combining all basic profile depths, profiPANEL enables a total of nine mounting depths to be provided for. The connection of 60 or 90 mm deep desk also offers additional options for extended internal mounting. Thanks to this wide range of depths, profiPANEL therefore enables almost every conceivable configuration for the internal mounting of components to be realised. The enclosure front of the profiPANEL system is manufactured made-to-measure and provides for the almost edgeless and flush mounting of a front plate, which is permanently connected to the enclosure. Appropriate cut-outs for a display, switches and more are included in the service provided by ROLEC and are produced ex-works to meet customer specifications. A desk is a clever solution when there’s not enough space in the control enclosure or you need additional buttons. The profiPANEL series therefore includes two desk models, 60 and 90 mm deep (D), for internal mounting. The desk adapter offers plenty of space for routing HDMI or DVI cables or network plugs. The desk is 200 mm high ex works. Non-standard dimensions are available on request. The rear wall of the desk is bolted on as standard. An ergonomically designed profile handle system is available for even more convenient handling, particularly with the deeper profile versions. There is also a 450-mm wide latching keyboard holder as an alternative to the desk, which can be enhanced and/or extended by an additional mouse holder.
Enclosure sizes | Made-to-measure as per customer's needs |
L x W x H max. 150 x 150 x 360 mm 800 x 800 x 60-300 mm | |
Additional information | Minimalist, multi-variable design for modern machines Profile enclosure – made-to-measure Four basic profiles (60/90/120/150 mm). Nine enclosure depths: 60/90/120/150/180/210/240/300 mm Front plate is permanently connected to the enclosure, mounted almost edgeless and flush |
Enclosure | Extruded aluminium |
Thermoplast corner covers, RAL 7035, 9005, 3020 or 5017 | |
Standard front plates: aluminium 3 mm, Al Mg 1, silver anodised | |
Optional: Finished front plates, lasered, engraved or printed | |
Optional: Profile handle, extruded aluminium with plastic connection, RAL 7035 | |
Enclosure lock Basic profiles: locks and exterior hinges, optionally bolted Enclosure lock profile combinations: locks and exterior hinges | |
Fastening | Basic profile 60 with panel coupling, all other profiles with couplings from one of our suspension arm systems |
Internal mounting | Slide-in contour for spring nuts M4/M5 |
Ingress protection | Up to IP 65 / EN 60529 |
Coating | Anodised |
ROLEC service | Avail of our Full Service Offer for installation-ready enclosures |