Call us
+1 (888) 658-5774
aluDISC
The round electronics enclosures
Optionally available certification:

IP 66, IP 67 - Optional: IP 69K
The key product features:
• Enclosure material: diecast aluminum
• Enclosure surface: powder coating, RAL 7035
• Clip-on design covers
• The enclosure can be fastened when the cover is fitted
• Integrated recess to accommodate membrane keypad or front plate
• Lid screws in stainless steel 1.4567
• Enclosure seal: silicone molded gasket
More
aluDISC is the world's first round diecast aluminum enclosure for industrial electronics. The unique design integrates perfectly with machinery and piping systems. No matter if it is mounted on a wall, to a pipe system or a machine housing, the round aluDISC shape will always make a great impression.
Standard features include IP 66 and IP 67 protection classes, a recessed lid for fitting a membrane keypad or product label, snap-on design covers which hide the lid screws and mounting holes, lid retaining straps, an optional hinged IP 65 transparent cover and screw bosses in the base and lid for fitting PCBs, mounting plates etc. The enclosures can be mounted without opening the lid which means your electronics remain protected at all times. Matching cable glands and other accessories are also available.
We can supply aluDISC enclosures fully customized to your requirements.
- aluDISC
- AR 080
- Part No.
- 280.080.000
- Dimensions
- 3.82x4.33x2.17 Remember
- aluDISC
- AR 100
- Part No.
- 280.100.000
- Dimensions
- 4.69x5.12x2.56 Remember
- aluDISC
- AR 120
- Part No.
- 280.120.000
- Dimensions
- 5.47x5.91x3.15 Remember
- aluDISC
- AR 120 with protection cover
- Part No.
- 280.120.100
- Dimensions
- 5.47x5.91x3.15 Remember
- aluDISC
- AR 160
- Part No.
- 280.160.000
- Dimensions
- 7.05x7.48x3.54 Remember
Enclosure sizes | 4 |
Additional info | Integrated recess in the lid for membrane keypad or front plates |
For AR 120: Optional protective cover with hinge mechanism made from transparent polycarbonate (PC), | |
UV stabilised, UL 94 V-2 – 0,36 ~ 1,9 mm, HB > 1,9 mm, sealable | |
Clip-on design covers, plastic POM (polyoxymethylene), similar to RAL 7016 anthracite gray | |
Optional: Lid support, lid screw with plastic element made from stainless steel 1.4567 and polyamide (PA6) | |
Enclosure | Diecast aluminum alloy |
EN AN-44300 DIN EN 1706 | |
(GD Al Si 12/DIN 1725) | |
1° mold slope for casting ejection > internal circumference dimensions decrease by 1° towards enclosure bottom. | |
Fastening | Separate screw channels |
Internal mounting | Fastening thread on the enclosure base and in the lid |
Ingress protection | IP 66, IP 67 / EN 60529 |
Optional: IP 69K / ISO 20653 | |
Gasket | Silicone molded gasket |
Optional: Chloroprene O-ring gasket (CR) | |
Lid screws | Stainless steel 1.4567, captive |
Surface | Powder coating RAL 7035, light gray |
Optional: Special colors | |
Optional: Corrosion protection | |
Customizing | Learn more about our full customizing service for installation-ready enclosures |