Call us
+1 (888) 658-5774
profiCASE
Robust aluminium enclosures for HMI/IPC devices up to 10"
IP 65/66, IP 67
Key product features: profiCASE is an economical alternative for panel PCs up to 10" and all types of electronic components. Thanks to its robust design, it is perfectly suited for both modern mechanical engineering and vehicle construction. The integration of genuine hinges without additional effort has been optimally achieved in this series. After ‘hooking’ the covers and securing them with locking screws, they become ‘compact cabinets’. The two profiCASE enclosures are available with the option of rear screw mounting – i.e. without screws visible from the front – (PCD) or with front screw mounting – for example, for direct wall mounting – (PCV). All enclosures have domes in the lower section that offer the option of mounting with VESA 100 while remaining completely sealed. It is also possible to connect them to the profiPLUS and taraSMART suspension arm systems in a standing or hanging configuration.
• 2 enclosure sizes, 2 cover variants
• Enclosure material: die-cast aluminium
• Enclosure surface: powder coating RAL 7016 or RAL 7035
• Integrated handle strips
• Integrated hinge solution, captive lid
• The opening angle of the lid is max. 95°
• Connection options:
- Direct mounting on the machine body/vehicle
- Support arm systems profiPLUS 50 or taraSMART
- VESA 100 connection
• Enclosure seal: PUR
Request offer
PDF datasheet
More
PCV
profiCASE model PCV – series with front-mounted lid screws
PCD
profiCASE model PCD – series with rear-mounted lid screws
Product overview
Dimensions
Data Sheets
Data
- profiCASE
- PCD 07
- Part No.
- 122.320.016
- Dimensions
- 12.60x11.81x3.35 Remember
- profiCASE
- PCD 07
- Part No.
- 122.320.035
- Dimensions
- 12.60x11.81x3.35 Remember
- profiCASE
- PCD 10
- Part No.
- 122.400.016
- Dimensions
- 15.75x14.96x3.35 Remember
- profiCASE
- PCD 10
- Part No.
- 122.400.035
- Dimensions
- 15.75x14.96x3.35 Remember
11.81x12.60x3.35
11.81x12.60x3.35
14.96x15.75x3.35
14.96x15.75x3.35
| Enclosure sizes | 2 - with 2 cover variants: PCV = series with cover screw connection from the front and PCD = series with cover screw connection from the rear |
| Further information | Integrated hinge function on side D, optionally with 2 locking screws (A2, self-forming) to prevent the cover from being lost |
| Lid opening angle max. 95° | |
| Enclosure | Die-cast aluminium alloy EN AC-44300 DIN EN 1706 (GD Al Si 12/DIN 1725) Draft angle 1° > Clear internal dimensions are reduced by 1° all around up to the enclosure base |
| Fastening | Separate screw channels |
| Fittings | Fastening domes on the enclosure base |
| Protection class | IP 65/66, IP 67 / EN 60529 |
| Seal | Foamed, polyurethane (PUR) |
| Sureface | Powder coating RAL 7016 or RAL 7035 Optional: Special colours |
| Cover screws | Stainless steel 1.4567, M5 with TX25, captive |
| Hinges | M5 self-forming locking screws for hinge fastening |
| ROLEC service | Avail of our Full Service Offer for installation-ready enclosures |