Call us
+1 (888) 658-5774
multiPANEL
The premium design HMI enclosure
(UL approval only valid for MPD 7000+7011)
IP 65
The most important product features:
• Enclosure material: aluminum profiles, stainless steel decorative inlays
• Enclosure surface: body and rear wall or doors RAL 9005
• Profile enclosure – high-precision production from 150 x 150 mm to 800 x 800 mm
• Firmly glued aluminum front plate
• 2 enclosure heights: 70 and 85 mm
• Connection to the profiPLUS 50 and taraSMART suspension systems
• Enclosure seal: Silicone foam
To configure this product, please use our practical multiPANEL configurator
Request offer
PDF datasheet
More
multiPANEL offers the option of integrating every conceivable application. The enclosure front facilitates the permanent installation of a front plate or glass front, e.g. for touch applications. Almost borderless, with flush installation and permanently connected with the enclosure. Suitable cut-outs for switches and more are included in the service provided by ROLEC, and are established in the production department at the German headquarters in accordance with customer specifications.
With the flat multiPANEL 70 version, the rear wall is optionally available with a flush rear wall, which can be supplied as a fully bolted version, bolted with hinges or with locks and hinges. multiPANEL 85 is also available for an even greater enclosure depth. Internal mountings can naturally also be installed in the door. For this purpose, stays are fitted inside the door on request by the customer, in preparation for the technical installation.
multiPANEL 70
multiPANEL with a depth of 70 mm: The front plate is permanently connected with the enclosure body. It is fully mounted in the factory and supplied complete with customer-specific processing.
multiPANEL 85
multiPANEL with a depth of 85 mm: The front plate is permanently connected with the enclosure body. It is fully mounted in the factory and supplied complete with customer-specific processing.
Accessories
Find the right accessories for all multiPANEL enclosures.
Product overview
Dimensions
Data Sheets
Data
| Enclosure sizes | Made to customer required sizes |
| L x W x H max. 800 x 800 x 70/85 mm | |
| Additional infos | Puristic, multi-variable design for modern machines Profile enclosure – produced to the precise millimetre Two enclosure depths: 70 and 85 mm |
| Material/Colour | Extruded aluminium |
| Aluminium corner pieces mounted with aluminium profiles | |
| Standard front plates: Aluminium 3 mm, Al Mg 1, silver anodised | |
| Optional: Finished front plates, lasered, engraved or printed | |
| Membrane keypads ready for installation | |
| Optional handle: POM RAL 9005, with stainless steel inlay V2A | |
| Fastening | With panel coupling from one of our suspension arm systems |
| Internal mounting | Slide-in contour for spring nuts M4/M5 |
| Ingress protection | IP 65 / EN 60529 |
| Gasket | Silicone foam |
| Surface | Powder coating RAL 9005 Deep black, fine structure |
| Optional: other colours | |
| Customising | Learn more about our Full Service Offer for installation-ready enclosures |